Page 4 of 4

Posted: Thu Jul 10, 2014 11:05 pm
by bluesnow
To print 3240 X 2175 covers on our 8 1/2" X 11" paper I use borderless printing, with minimum expansion, and set PS to 98.5%. This allows me to print closer to the edge of the paper than the printer margins normally allow. The same 98.5% sounds like you're also using borderless printing and I suspect spacebug is as well.

Posted: Sat Jul 12, 2014 9:44 am
by Spacebug
Thx for your comments, yes it's since i'm using Ps CC. With Corel DRAW i didn't had the problem. Everytime i choose borderless printing.
Ok than i would do it like you with 98,5%.

Thx fellows ;)