House M.D. DVD Cover Season 1
-
PierreF10
- HiRes Regular
- Posts: 384
- Joined: Sat Nov 20, 2010 7:54 pm
- Location: Repentigny, Québec
- Contact:
Did the front quickly, LCD i had to crop the picture of the corridor so the top of it ended up black, i'll work levels and saturation on the picture and will try to work the point of vue of the camera it is a bit low so it's hard to fit the render of house properly in the corridor, mostly wanted some feed back on how the front was working out, thanks for the suggestions guys will try to implement them!!
-
PierreF10
- HiRes Regular
- Posts: 384
- Joined: Sat Nov 20, 2010 7:54 pm
- Location: Repentigny, Québec
- Contact:
[attachment=15817:House_Se...vr_Prv_4.jpg]
Redid the front picture, opacity on the red is at 70% if i go lower i wind up with pink, but while writing this i thought of something else i could do so i will rework the front, changed the picture on the back diminished the quote and added the special features, and i also noticed that i did not realign the layers properly and ended with some front cover on the spine something else to fix, so how does it look??
Redid the front picture, opacity on the red is at 70% if i go lower i wind up with pink, but while writing this i thought of something else i could do so i will rework the front, changed the picture on the back diminished the quote and added the special features, and i also noticed that i did not realign the layers properly and ended with some front cover on the spine something else to fix, so how does it look??
- bpmford
- HiRes Uber Member
- Posts: 2317
- Joined: Fri May 08, 2009 4:28 pm
- Location: Calgary, Canada
- Contact:
This is looking really cool buddy... will be a great set!
For me, the back main image and the front one look different. Maybe it's the lack of a BG behind him and the blood. Also I would pump up the levels of the back image too as they are intense on the front. Also the front looks grainy to me, might work on the back too...
Maybe using that red coloring from the front as a color overlay on the back even on the screens!
just some thoughts! Keep it up!
For me, the back main image and the front one look different. Maybe it's the lack of a BG behind him and the blood. Also I would pump up the levels of the back image too as they are intense on the front. Also the front looks grainy to me, might work on the back too...
Maybe using that red coloring from the front as a color overlay on the back even on the screens!
just some thoughts! Keep it up!
-
PierreF10
- HiRes Regular
- Posts: 384
- Joined: Sat Nov 20, 2010 7:54 pm
- Location: Repentigny, Québec
- Contact:
[attachment=15824:House_Se...vr_Prv_6.jpg]
Tried to implement some of your suggestions, added some elements to the back pic, no problems with your english Nok, i decided to leave him in the middle and i like the quote under him by adding the x-rays and the red carpet i felt it looked better in the middle , dirtied up the picture with noise and played with levels a bit, changed the red paint slashes to less obvious ones, they might be too much? Any thoughts??
Tried to implement some of your suggestions, added some elements to the back pic, no problems with your english Nok, i decided to leave him in the middle and i like the quote under him by adding the x-rays and the red carpet i felt it looked better in the middle , dirtied up the picture with noise and played with levels a bit, changed the red paint slashes to less obvious ones, they might be too much? Any thoughts??
-
PierreF10
- HiRes Regular
- Posts: 384
- Joined: Sat Nov 20, 2010 7:54 pm
- Location: Repentigny, Québec
- Contact:
[attachment=15828:House_Se...vr_Prv_7.jpg]
Thanks Nok and Bpm, added the credits, and B you were right i forgot i had put the x-ray picture at 40% opacity wile fixing some other stuff so i could see through, i think i fixed it, i had to play with levels a bit to make it look good, so any other thoughts??
Thanks Nok and Bpm, added the credits, and B you were right i forgot i had put the x-ray picture at 40% opacity wile fixing some other stuff so i could see through, i think i fixed it, i had to play with levels a bit to make it look good, so any other thoughts??
Who is online
Users browsing this forum: No registered users and 1 guest
lol